Find the answer to your computer problem.
Click here to see our NEW TechTalk FREE support newsgroup for users and techs!
Configure and buy a UserEasy custom- built Pentium III Computer System online. Click here.
|
Home
Search
Order
About UserEasy
Contact Us
Contents
Products
Support
Year2000
| UserEasy.com, Power Supplies - 300W ATX Power Supply (AGPB-P4ATX30) with Single Fan, 12V P4 Connector, Std ATX Connector and Retail Box) Intel & AMD Approved |
Click the image to enlarge |
| Category: | Power Supplies |
| Description: | 300W ATX Power Supply (AGPB-P4ATX30) with Single Fan, 12V P4 Connector, Std ATX Connector and Retail Box) Intel & AMD Approved |
| Manufacturer: | A+GPB ENTERPRISES |
| Vendor Part #: | AGPB-P4ATX30 |
| SKU: | 5788 |
| |
Detailed Description:
|
|
P4ATX-300W
Switching Power Supply
|
AC INPUT: 115/230 Vac~ 10/5A 60/50Hz
DC OUTPUT : |
| COLOR |
BROWN |
RED |
WHITE |
YELLOW |
BLUE |
PURPLE |
BLACK |
GREEN |
ORANGE |
| DC |
+3.3V |
+5V |
-5V |
+12V |
-12V |
+5V-SB |
COM |
PS-ON |
PW-OK |
| OUTPUT |
20A |
22/25A |
0.5A |
15A |
1.0A |
2.0A |
RETURN |
REMOTE |
P.G. |
| (3.3V and +5V Max
Output 180W, Peak Surge Max Output 328W) |
|
Features
- High
efficiency
- Low
Ripple & Noise
- Output
over voltage protection
- Short
circuit protection on all outputs
- Reset
table power shut down
- Approved
by UL, TUV, CB & CE
- INTERNAL
12 VDE fan
- Complies
with FCC part 15 subpart J Class B at 115VAC operation & CISPR
22 Class B at 230 VAC operation
- 100%
burn-in under high ambient temperature(50¢J)
- Vacuum-impregnated
transformer
- MTBF:50K
hours at 25¢J
- 100%
Hi-pot tested
- FULL RANGE
100~240VAC (300W)
Input
Characteristics
- Voltage:
95-132 VAC or 180-264 VAC switch able
- Frequency:
47 Hz TO 63 Hz
- Input
current: 10 amps maximum/ 115 Vrms,60 Hz. 5 amps maximum /230
Vrms,50Hz.
Specification
- Remote
ON/OFF Control: The power supply shall accept a logic collector
level which will disable / enable all output voltage (excluding
+5V standby).
- Temperature
range: operating 0¢J~50¢J, storage -20¢J ~ +80¢J
- Temperature
coefficient: 0.01% / ¢J
- Transient
response: output voltage recovers in less than 1 ms max. following
a 25% load change
- Hold-up
time: 16ms minimum at full load & nominal input voltage
- Dielectric
withstand: input / output 1800 VAC for 1 second, input to frame
ground 1800VAC for 1 second
- Humidity:
5~95% RH
- Efficiency:
65% min. 70% typical, at full load
- Power
good signal: turn-on delay 100 ms to 500 ms
- Overload
protection: 150% max.
- Inrush
current: 60A cold , 80A ware at 132 VAC
- Over
voltage protection: +5V output : 6.5V; +3.3V output: 4.6V;+12V
output: 15.5V
* Detailed
specifications and drawings provided upon request |
|
|
|